Brand:HAUSER Type:S50-DR Category: jig grinding machine
Technical Parameter
Manufacturer | HAUSER |
Model / Type | S50-DR |
weight approx. | 8,000 kg |
Approx. Onsite Dimension. (l x w x h) | 4,600 x 2,300 x 2,900 mm |
Year of construction | probably 1986 |
Adjustment range | |
In the X-axis (table slide) | 900 mm |
In the Y-axis (sanding head) | 600 mm |
In the W-axis (moving crossbeam) | 635 mm |
Feed speed | |
In the X- and Y-axis, direct current drive, infinitely variable | 5 – 2500 mm/min |
In the W-axis, three-phase drive | approx. 800 mm/min |
Measured value display | |
Smallest display unit | 0.001 mm |
Zero point can be selected as required | |
Positioning accuracy (basic deviation X, Y) | 0.004 mm |
Table | |
Usable table surface | 1020 x 860 mm |
Permissible table load | max. 800 kg |
Width of the T-slots | 14 mm |
Number of T-slots | 7 |
Distance between the T-slots | 100 mm |
Working range of the sanding head | |
Grinding spindle speeds, infinitely variable with electric motors | 4500 – 80000 rpm |
With air turbines up to 100000 and 160000 rpm | |
Planetary speed, infinitely variable | 5 – 250 rpm |
Stroke of the grinding spindle sleeve | max. 180 mm |
Diameter of the grinding spindle sleeve | 100 mm |
Radial infeed of the grinding wheel | 6 mm |
Weight compensation of the grinding spindle sleeve | pneumatic |
Capacity | |
Cylindrical grinding (with wheel) diameter | 100 mm |
Without intermediate plate | max. diameter 230 mm |
With intermediate plate | max. diameter 360 mm |
Sanding length Z (with mandrel) | max. 125 mm |
For further technical data see pictures | |
With technical documentation as shown in the pictures | |
With accessories as shown in the pictures | |
With motor for groove grinding and other accessories (see pictures) |
Copyright ©2008-2023 Xi'an Eurasia Machinery Equipment Co.,Ltd All Rights Reserved
网站备案号:陕ICP备20002798号-1
Copyright ©2008-2023 Xi'an Eurasia Machinery Equipment Co.,Ltd All Rights Reserved
网站备案号:
陕ICP备20002798号-1